Centre stand stop for 4 into 1 for Z900/Z1000
On a bike with Standard exhausts, the centre stand is prevented from hitting the chain by the rubber on the underside of the exhaust system.
If you have a 4 into 1 and want to retain the centre stand, you end up with an ugly bit of rod that you bolt to a footrest bracket to do the same job.
This small bracket is fitted under the nut on the centre stand bolt on the RIGHT hand side of the bike (See photos)
It stops the centre stand from coming up too far and hitting the chain, and is neatly tucked away.
A much better solution